The tiny TOOLS DTE-16 is a feature rich DTMF tone/sequence encoder that is user programmable to encode up to four tone sequences or a single tone via any one of 16 contact closure inputs and/or the RS-232 serial port. Each input may be programmed to generate a tone for the duration of the closure or tone burst immediately on command. A passive mixing network is provided to mix both the program and encoder audio if required. Programming is performed using a non-dedicated PC's COM port equipped with Windows HyperTerminal. Features: Encodes all 16 DTMF tones; adjustable tone generation time; balanced low Z output, passive program mixer input; front panel status for power, valid DTMF tone, serial data activity, recessed programming push button with LED indicator and recessed output level control with a range of off to +4dbm. All connections are on screw terminals except for the DB-9 female serial port connector. The DTE-16 may be set on a desktop, wall mounted or up to four units mounted on the RA-1, Rack-Able mounting shelf.
131 State Street • Sedro-Woolley, WA 98284
Ph: 360.854.9559 • support@broadcasttools.com • Fax: 866.783.1742 Monday through Thursday 8:00 AM to 5:00 PM Pacific Time
Broadcast Tools® is a registered trademark of Broadcast Tools, Inc.
tiny TOOLS™ is a trademark of Broadcast Tools, Inc.
All Sentinel™ labeled products are a trademark of Broadcast Tools, Inc.
Copyright ® 1989 - 2010 by Broadcast Tools, Inc. All rights reserved.
Pricing and availability are subject to change without notice.
