Looking for a contract Broadcast Engineer in your area?
Check out this link.
Having trouble with Lightning Damage?
Check out these websites:
http://www.polyphaser.com
http://www.itwlinx.com

Office Hours
Monday through Thursday, 8:00 am to 5:00 pm Pacific Time; closed Fridays

Broadcast Tools, Inc. will be closed in observance of the following holidays:
Memorial Day: Monday, May 28th
Independence Day: Wednesday, July 4th
Labor Day: Monday, September 3rd
Thanksgiving Day: Thursday, November 24th
Christmas Day: Tuesday, December 25th


Assembled in the USA,
by American Workers
Web site design by:
RDDA 4x4


Product Overview The RDDA 4x4 quad-mode AES/EBU digital distribution system provides up to sixteen outputs from a single digital source. The sixteen outputs may be split into four groups, providing four transformer-balanced outputs each from a single source.

The RDDA 4x4 is ideal for distributing AES/EBU signals of sample rates up to 96kHz and/or word clock around your facility without any signal alteration.

The RDDA 4x4 is equipped with four transformer balanced loop-thru inputs with selectable termination and sixteen transformer-balanced outputs with selectable termination. There are four configuration modes selected by DIPswitches. Single mode, operates as a 1 x 16 D.A. Dual mode operates as a 2 x 8 D.A. Tri-mode operates as a 3 x 4 D.A. and the quad mode, operates as a 4 input x 4 output AES/EBU D.A. All modes are independent with no interaction between channels.

Inputs, outputs and status are supplied on plug-in euroblock connectors. Input signal presence is monitored and displayed on four front panel LEDs with remote open collector status provided on the rear panel. The RDDA 4x4 is powered by a surge protected internal power supply. The half rack profile, allows the unit to be set on a desktop, mounted on a wall or as part of the new RA-1, Rack-Able mounting shelf.
Features/Benefits

  • Four transformer balanced loop-thru inputs with selectable termination
  • Sixteen transformer balanced outputs with selectable termination
  • Accepts sample rates up to 96 kHz
  • I/O selection via DIP switches
  • Power and Status indicators
  • Open Collector Status outputs

Applications AES/EBU Digital signal distribution

131 State Street • Sedro-Woolley, WA 98284
Ph: 360.854.9559 • support@broadcasttools.com • Fax: 866.783.1742
Monday through Thursday 8:00 AM to 5:00 PM Pacific Time

Broadcast Tools® is a registered trademark of Broadcast Tools, Inc.
tiny TOOLS™ is a trademark of Broadcast Tools, Inc.
All Sentinel® labeled products is a registered trademark of Broadcast Tools, Inc.
Copyright ® 1989 - 2012 by Broadcast Tools, Inc. All rights reserved.
Pricing and availability are subject to change without notice.