Looking for a contract Broadcast Engineer in your area?
Check out this link.
Having trouble with Lightning Damage?
Check out these websites:
http://www.polyphaser.com
http://www.itwlinx.com

Office Hours
Monday through Thursday, 8:00 am to 5:00 pm Pacific Time; closed Fridays

Broadcast Tools, Inc. will be closed in observance of the following holidays:
Memorial Day: Monday, May 28th
Independence Day: Wednesday, July 4th
Labor Day: Monday, September 3rd
Thanksgiving Day: Thursday, November 24th
Christmas Day: Tuesday, December 25th

Assembled in the USA,
by American Workers
Web site design by:
ESS-1


Product Overview The ESS-1 provides a cost-effective, small profile solution for standard serial-to-Ethernet connectivity. It is ideal for applications requiring data support for both RS-232 and RS-422 communications. The ESS-1 allows any device with a serial port, Ethernet connectivity and is ideal for serial tunneling or applications where a COM port, TCP Socket, UDP Socket, or UDP Multicast functionality is needed. Serial bridging/tunneling allows two previously non-networked devices to easily communicate information and operate with existing installed software applications on an Ethernet network. The ESS-1 also works with software applications using TCP/UDP Sockets, allowing a serial device to interoperate with the software applications without the need to install a driver. The ESS-1 is simple to install locally or remotely through most web browsers or our supplied configuration utility. The included "Device Installer" utility application will automatically detect all ESS-1 devices on your network. A Set up guide is provided to make network configuration hassle-free. The ESS-1 is FCC part 15 verified and is intended for commercial use only. The small profile of the ESS-1 makes installation hassle-free.
Features/Benefits

  • 10/100 base-T auto-sensing Ethernet port with Link & activity indicator - Full/half duplex operation.
  • Supported protocols: TCP/IP, UDP/IP, ARP, ICMP, SNMP, TFTP, Telnet, DHCP, BOOTP, HTTP, and AutoIP.
  • Device Installer setup utility supplied.
  • COM port redirector driver supplied
  • Serial port baud rates from 300 to 920K baud.
  • RS-232 serial port with flow control.
  • RS-422 serial port via plug-in euroblock screw terminals.
  • LED indicators for Power, TX and RX data.
  • Wide range input power requirements from 7.5 to 34 VDC.
  • 9 VDC wall transformer supplied. (Optional CE certified 240 VAC power supply available).
  • Small profile packaging.
131 State Street • Sedro-Woolley, WA 98284
Ph: 360.854.9559 • support@broadcasttools.com • Fax: 866.783.1742
Monday through Thursday 8:00 AM to 5:00 PM Pacific Time

Broadcast Tools® is a registered trademark of Broadcast Tools, Inc.
tiny TOOLS™ is a trademark of Broadcast Tools, Inc.
All Sentinel® labeled products is a registered trademark of Broadcast Tools, Inc.
Copyright ® 1989 - 2012 by Broadcast Tools, Inc. All rights reserved.
Pricing and availability are subject to change without notice.