The Broadcast Tools ACS 8.2 Plus/RJ function and operation is identical to the ACS 8.2 Plus and adds multiple RJ45 connectors for all audio connections and the RJ-21X (punch block) connector for the GPIO connections. The RJ45 conforms to the StudioHub+ format. The ACS 8.2 Plus/RJ provides matrix audio switching of 8 stereo inputs to 2 stereo plus 2 mono outputs. Any input assigned to output one has fading capabilities. Matrix switching allows any/or all inputs to be assigned to any/or all outputs. The ACS 8.2 Plus/RJ is equipped with a front panel monitor selection switch. This allows the user to select which stereo output the VU meters and headphone amplifier monitors. Optional* AGC modules may be added to each output channel to maintain consistent levels. The ACS 8.2 Plus/RJ may be controlled via front panel switches, contact closures, 5-volt TTL/CMOS logic and/or the multi-drop RS-232 serial port (An optional USB adapter is available).
* Must be installed at time of order or returned to factory for installation.
Features/Benefits
True matrix switching, any or all inputs may be assigned to any or all outputs. Any input assigned to output one may be faded up, down or dimmed from either the front panel, contact closures, 5-volt TTL/CMOS logic or the multi-drop RS-232 serial port.
Logic functions via microprocessor and non-volatile memory.
Internal stereo silence sensors monitor both output channels. Each is equipped with front panel "SS" LED indicators; adjustable alarm delay and restore duration. Sensitivity is factory set at -34db.
Front panel input selection switches are provided for each input channel with separate output indicator LED's.
Power-up selection of inputs to outputs, mute or last source selected.
VU meters with front panel output selection switch.
Stereo headphone amplifier with front panel output selection switch, headphone jack and level control.
Most configuration options via rear panel dipswitches.
16 input GPI port (PIP) with LED indicator.
8 open collector channel status outputs or programmable via burst commands.
8 SPDT relay outputs with multiplex function on output two.
Programmable via serial burst commands.
Multi-turn input and output level controls.
Electronically balanced stereo inputs.
Electronically balanced stereo and monaural outputs.
Low noise and distortion circuitry.
Remote control of front panel functions and status.
Multidrop RS-232 serial port with data activity LED.
Multiple units may be cascaded to expand inputs.
1-RU chassis.
131 State Street • Sedro-Woolley, WA 98284
Ph: 360.854.9559 • support@broadcasttools.com • Fax: 866.783.1742 Monday through Thursday 8:00 AM to 5:00 PM Pacific Time
Broadcast Tools® is a registered trademark of Broadcast Tools, Inc.
tiny TOOLS™ is a trademark of Broadcast Tools, Inc.
All Sentinel™ labeled products are a trademark of Broadcast Tools, Inc.
Copyright ® 1989 - 2010 by Broadcast Tools, Inc. All rights reserved.
Pricing and availability are subject to change without notice.
