The GPI-24 interfaces 24 optically isolated inputs to a users PC's RS-232 or USB port. Each input can be configured to generate user programmable ASCII, HEX or control character strings on each rising and/or falling input transition. Each string can be up to 32 characters long. Programming is performed using HyperTerminal or your favorite com program. The user has three additional pre-programmed selections. The "PIP" GPI format is used on most of our audio switchers and most satellite receivers, the AT-1616 format used on one of our most popular serial GPIO interfaces and the short ASCII format, which is used by a number of Radio automation suppliers. Additional features include; Plug-in euroblock screw terminals; optional StarGuide II/III relay card adapter; LED indicators for power and input activity. The GPI-24 is supplied with a Smart USB-RS-232 adapter cable, DB-9 straight-through cable and 9 vac wall transformer. The GPI-24 is powered by a surge protected internal power supply. Two GPI-24's may be rack mounted via the optional 1-RU, RM-3 mounting shelf or up to 12 units on the RA-12 rack panel. DIN rail clips are available as an option for mounting on a DIN rail.
NOTE: The DIN brackets allow the mounting of all Flex Chassis products. Contact the factory for pricing.
131 State Street • Sedro-Woolley, WA 98284
Ph: 360.854.9559 • support@broadcasttools.com • Fax: 866.783.1742 Monday through Thursday 8:00 AM to 5:00 PM Pacific Time
Broadcast Tools® is a registered trademark of Broadcast Tools, Inc.
tiny TOOLS™ is a trademark of Broadcast Tools, Inc.
All Sentinel™ labeled products are a trademark of Broadcast Tools, Inc.
Copyright ® 1989 - 2010 by Broadcast Tools, Inc. All rights reserved.
Pricing and availability are subject to change without notice.
