Monday through Thursday, 8:00 am to 5:00 pm Pacific Time; closed Fridays
Broadcast Tools, Inc. will be closed in observance of the following holidays:
Memorial Day: Monday, May 27th
Independence Day: Thursday, July 4th
Labor Day: Monday, September 2nd
Thanksgiving Day: Thursday, November 28th
Christmas Day: Wednesday, December 25th
Designed in Washington State
Assembled in the USA
The Relay Sentinel® is the fastest, easiest, least expensive, and most reliable way to remotely control and/or monitored equipment over any IP network including private networks, IP-based industrial control networks, and the Internet. Users can operate the product using a web browser or web-enabled mobile device, while email notification may be configured to alert up to four recipients when alarms are detected. The user may also enable a sound effect to play when an alarm is generated. Logging of relay status, along with the site ID may be emailed from once an hour to once a day. The Relay Sentinel™ has three low-signal SPDT relays that can individually switch up to 1 Amp at 28V. Each relay can be turned on, off, pulsed or timed latched using the built in web pages.
The Relay Sentinel® may be paired with the Status Sentinel™ to form a “Relay Extension Cord”.
Logging of relay status, along with the site ID may be
emailed in time spans from once an hour to once a day.
Three-SPDT 1 amp relays.
Plug-in euro-block screw terminals for all status inputs.