Looking for a contract Broadcast Engineer in your area?
Check out this link.
Having trouble with Lightning Damage?
Check out these websites:
http://www.polyphaser.com
http://www.itwlinx.com

Office Hours
Monday through Thursday, 8:00 am to 5:00 pm Pacific Time; closed Fridays

Broadcast Tools, Inc. will be closed in observance of the following holidays:
Closed December 25 through January 1, 2014. Limited technical support is available during the holiday break.

New Year’s Day, Thursday, January 1, 2015
Memorial Day, Monday, May 26, 2014
Labor Day, Monday, September 1, 2014
Thanksgiving Day, Thursday, November 27, 2014
Christmas Day, Thursday, December 25, 2014



Designed and Assembled in
Washington State, USA

Web site design by:
Status Sentinel® 16


Product Overview Available NOW.

The Status Sentinel®16 is a robust, full-featured; Ethernet based data acquisition device with sixteen logic-level (status) inputs. All Status/logic inputs are activated by a closure to ground. External sources can be contact closures, open collectors or 5, 12, 15 and 24-volt logic-level sources. The Status Sentinel®16 can be monitored over any IP network including private networks, IP-based industrial control networks and the Internet. Users can operate the product using a web browser or web-enabled mobile device, while email notification may be configured to alert up to four recipients when alarms are detected. The user may also enable a sound effect to play when an alarm is generated. Logging of system status, along with the site ID may be emailed in time spans from once an hour to once a day. We have also provided SNMP capabilities to allow multiple units to be monitored with any SMNP manager software package. SMTP username and passwords are also supported

The Status Sentinel®16 may be paired with the Relay Sentinel®16 to form a “16 channel Relay Extension Cord”.
Features/Benefits

  • Logging of all input status, along with the site ID may be emailed in time spans from once an hour to once a day.
  • Plug-in euro-block screw terminals for all status inputs.
  • Seventeen activity LED indicators.
  • Rear panel RJ-45, 10/100base-T LAN/Ethernet interface.
  • Fully RFI proofed.
  • Surge protected power supply. Domestic supply provided.
  • Four units may be mounted on one RA-1 1-RU shelf.
Applications

  • PPM Monitoring and alarm logging.
  • Web-enabled networked message board controller.
  • Input end of a web-enabled relay extension cord.
  • Input status monitoring via a web browser and/or
    user defined PC application.


131 State Street • Sedro-Woolley, WA 98284
Ph: 360.854.9559 • support@broadcasttools.com • Fax: 866.783.1742
Monday through Thursday 8:00 AM to 5:00 PM Pacific Time

Broadcast Tools® is a registered trademark of Broadcast Tools, Inc.
All Sentinel® labeled products are a registered trademark of Broadcast Tools, Inc.
Copyright ® 1989 - 2014 by Broadcast Tools, Inc. All rights reserved.
Pricing and availability are subject to change without notice.